Products
In times of increasing noise emission, structure-borne soundproofing is of increasing importance.
With its Köratac AN range, KÖMMERLING offers acoustically effective adhesives for the coil coating procedure that are based on decades of research and development. The acoustic soundproofing qualities can be adapted in large temperature ranges to suit the relevant requirements.
Whether for vehicle components, garage doors or recycling banks, KÖMMERLING has the right solution. And if we don’t already, we will develop this solution together with you.
KÖMMERLING
...the secure bond
|
Köratac AN 601
| Base
|
| Polyester |
| |
| Application
|
| Special adhesive for the manufacture of structure borne sound deadening composites, particularly suitable for the coil coating process. Excellent suitable for the assembly of components, which are exposed to low temperature load. |
| |
| Characteristics
|
| Köratac AN 601 is an anti noise coil coating adhesive with very good adhesion to metal and high chemical and thermal resistance.
The maximum of dampening is achieved at about 50°C. Köratac AN 601 is applied in dry layer thicknesses of 20 – 50 µm whereas the absorption characteristics are dependent on the layer thickness.
|
| |
| |
| |
| Processing instructions
|
| Please ask for our Technical Data Sheet! |
| |
| Colour
|
| Colourless,
opaque |
| |
| Packaging units
|
| Drum of 180 kg
|
|
 |
top
|
Köratac AN 605
| Base
|
| Polyester |
| |
| Application
|
| Special adhesive for the manufacture of structure borne sound deadening composites, particularly suitable for the coil coating process. Excellent suitable for the assembly of components, which are exposed to higher temperature loads (e.g. oil pans). |
| |
| Characteristics
|
| Köratac AN 605 is an anti noise coil coating adhesive with very good adhesion to metal and high chemical and thermal resistance.
The maximum of dampening is achieved at about 70°C to 75°C. Köratac AN 605 is applied in dry layer thicknesses of 20 – 50 µm whereas the absorption characteristics are dependent on the layer thickness.
|
| |
| |
| |
| Processing instructions
|
| Please ask for our Technical Data Sheet! |
| |
| Colour
|
| Colourless, opaque |
| |
| Packaging units
|
| Drums of 180 kg
| |
|
top
|
Köratac AN 607
| Base
|
| Styrene Rubber |
| |
| Application
|
| Special adhesive for the manufacture of structure borne sound deadening composites, particularly suitable for the coil coating process. The loss factor maximum is at about room temperature. |
| |
| Characteristics
|
| Köratac AN 607 is an anti noise coil coating adhesive with very good adhesion to metal and high chemical and thermal resistance.
The maximum of dampening is achieved at about 30°C to 35°C. Köratac AN 607 is applied in dry layer thicknesses of 20 – 50 µm whereas the absorption characteristics are dependent on the layer thickness.
|
| |
| |
| |
| Processing instructions
|
| Please ask for our Technical Data Sheet! |
| |
| Colour
|
| Colourless, opaque |
| |
| Packaging units
|
| Drum of 180 kg
|
|
|
top
